Project 510 gets meaty

If you’ve been following me on Instagram (@buildthreads) you might have seen a story I posted on the weekend showing some upcoming mods planned for the car. One of those being a fresh set of rubber! The tyres I had on the car were getting close to a decade in age, and even after a couple of track days, skid pans, and plenty of mountain runs, they just wouldn’t quit. While the tread was still plentiful, the compound had become hard and useless (yay free horsepower!), and a great deal on some Hankook R-s3s saw me getting the credit card out.

The tyres I had originally bought when I imported these wheels were also Hankooks, but just a regular Ventus model (I’m not even sure if R-S3s were around back then?). They were 195/45/15s, as I had wanted a lower profile because I had the car riding much lower back then.

However as time went by and the coilovers slowly got wound up a bit at a time, the 45 profile started to look out of place. I always knew my next set of tyres would be 50 profile, which is the norm for 15″ wheels on this type of car.

When I started researching what I wanted for my next set of tyres, I looked at all brands and various compounds. I ended up deciding on the R-S3s because my previous Hankooks had served me well for so long, so I felt comfortable sticking with the brand, and I didn’t feel the need to step up to a full semi-slick tyre at this point in time.

The tyres had been sitting in my garage for a few weeks now, but a free day saw me loading everything into the daily and getting the old tyres stripped off, and the new ones fitted and balanced. The car was actually up on stands waiting for one last part to arrive before I get it back on the road, but I just couldn’t resist seeing it back on all fours to check out how the taller rubber fitted the car.

The rear will need a touch of camber, but only on the passenger side, which tells me my alignment must be off, so that will be the next call to action once it’s back on the road. The front could probably do with a little bit more camber, and then I might throw a small spacer on, just to get it sitting similarly to the rear.

I can’t comment on the handling benefits or my levels of newfound grip, as I haven’t yet driven the car, but so far I’m loving how they look. Yeah! Sidewall!

And a sneak peek at what’s to come…

You can leave a response, or trackback from your own site.

4 Responses to “Project 510 gets meaty”

  1. wteebo says:

    Yikes those will definitely rub even with a bit of camber?! or am i missing something here? Love the car though!

  2. bent-grill says:

    looks really good man.

  3. Wteebo says:

    Did I miss something here but how will these not rub? Adding a bit more camber will help but not by looking at how much meat is hanging out, especially the front. I’m not being a hater just asking a noobie question ;o)

  4. anth says:

    I think the rears have more chance of rubbing than the front, I guess I’ll find out when I drive it! The front actually ran a 7mm spacer with the old tyres, which I’ve now removed.

Leave a Reply